▎Product overview
Built-in louver insulating glass is installed aluminum louver curtain in the hollow cavity of the insulating glass. Through magnetic force, the folding, unfolding and dimming functions of the built-in louver curtain can be realized.

The technology combines the external sunshade device, insulating glass and indoor curtain into one, which has the effect of all four. Firstly, it solves the problem that the installation of the exterior sunshade device is complicated and affects the building effect. Secondly, the 20mm large insulating glass air layer greatly improves the insulation and heat insulation of insulating glass, sound insulation and noise reduction. Once again indoor shutter built-in, to solve the problem of difficult to clean indoor curtains, easy to damage. The Angle of the built-in blinds at the back can be adjusted arbitrarily, creating a comfortable and warm beautiful space for the interior.

Product features:
First, easy to operate:
The magnetic handle can be pulled up and down easily, easy to operate;
Two, easy to clean: double-layer insulating glass built-in louvers, clean and transparent, easy for housewives to clean;
Three, privacy design: shutter can be turned over from a variety of angles, so that the sun can come and go freely;
Four, sound insulation, radiation insulation: large hollow glass air layer, when the noise transmission, coupled with built-in louvers, sound insulation effect is better,
Five, heating, insulation: different flipping angles of shutter, convenient sunlight, winter shutter closed, sunlight through the glass, indoor heat accumulation, play a heating role, night can be fully unfolded shutter, reduce heat loss, play a heat preservation effect;
Six, shading and heat insulation: aluminum magnesium 100 blade can rent direct sunlight, effectively reflect the surrounding objects to the indoor far infrared ray, play the role of shading, large air layer, effectively block indoor and outdoor heat transfer, block the formation of air convection, this is the priority of people;

Product details
1. Product specifications:
1.1 5+19A+5, 5+19A+6 (outside); (12.5mm louver)
1.2 5+21A+5, 5+21A+6(outside); (12.5mm,15mm louver)
1.3 5+23A+5, 5+23A+6 (Outside) (12.5mm,15mm Louvers)
1.4 5+35A+5,5+35A+6(Outside) (12.5mm,15mm, 25mm Louvers)
Note: Commonly used for 5mm, 6mm toughened glass, glass can also choose low-E high permeability, Low permeability glass or laminated glass. Matching according to different needs.

2. Product Series:
2.1 Single handle series, double handle and double control series;
2.2 Doors and Windows series, office partition series;

3. Transmission system:
3.1 The transmission system is a domestic first-line brand with low noise and strong sound insulation, which greatly improves the quality of living environment;
3.2 Stretch is controlled by magnetic force, the handle is light in design, easy to install and easy to stretch;
3.3 Humanized design, each size has been carefully designed by us to meet the needs of human engineering;

4. Profile requirements:
4.1 The total thickness of the finished product of the built-in louver insulating glass is >=30mm. Therefore, the width of the notch of the door and window profile is required to be >=32mm. If you do not know, you can call the company for consultation.
4.2 Built-in louvered insulating glass fixed and flat doors and Windows are suitable for profiles above 50 series, and sliding doors and Windows are suitable for profiles above 100 series. In special cases, the width of the lamella (press line) can be reduced to meet the space needed by the built-in louver insulating glass.

5. Product size:
5.1 Large size of louvers: 1500mmX2200mm; single louvers shall not exceed 2 square meters; double louvers shall not exceed 4 square meters;
5.2 Smaller size of louvers: narrower width 300mm;

6. Application scope: senior residence, apartment, villa, hotel, office building, partition, public building, sun room, curtain wall, etc...

7. Technical support: The company has a strong technical team to provide partners with the following services:
7.1 Overall energy saving scheme and thermal calculation scheme of the building;
7.2 Built-in louvered insulating glass system design and product development technology;
7.3 Design and construction technology of built-in louvered insulating glass system;

8 customized instructions:
8.1 Product color: custom color is acceptable, but the delivery period will be extended by 5-10 days, and the cost will be increased appropriately.
8.2 The company's regular stock colors are: white, gold, wood grain, coffee gray, champagne, etc. The specific color samples can be checked on the company's website
8.3 Delivery period: 15-20 days
8.4 Acceptable ordering area: the whole country
8.5 Packing instructions: Wooden frame/wooden case + carton + pearl sponge.