News Center
Function and application of insulating glass molecular sieve
2023-08-31
Function and application of insulating glass molecular sieve
The insulating glass molecular sieve can absorb moisture and residual organic matter in the insulating glass at the same time, so that the insulating glass insulating laminated glass still maintains smooth and transparent even at a very low temperature. At the same time, it can fully reduce the strong internal and external pressure difference of the insulating glass due to the great change of seasonal and diural-day temperature difference. The insulating glass molecular sieve also solves the problem of twisting and breaking caused by the expansion or contraction of the insulating glass and prolonging the service life of the insulating glass. Absorb the moisture in the cavity of the hollow glass, reduce the dew point, prevent glass fog, so as to achieve the purpose of heat preservation and energy saving, reduce noise.
Hollow glass molecular sieve uses:
Hollow glass molecular sieve is a kind of crystallized aluminosilicate mineral spherules, mainly used for air drying in double layer glass interlayer.
1) Absorb the moisture in the insulating glass, drying effect.
2) Anticoagulant cream effect.
3) Cleaning effect. The absorption of dust in the air (under the action of water) is very low.
4) Environmental protection. It can be recycled, it's not harmful to the environment, it can be recycled and reprocessed.
5) Energy saving effect. Used for insulating glass, and insulating glass aluminum strip, sealant and other reasonable coordination, to ensure the role of insulating glass energy saving.
The correct use of insulating glass molecular sieve:
1. Special molecular sieve for insulating glass should be sealed and preserved before use. If the packaging is found damaged, it can not be used. If the package has been opened and not used up, it shall not be used up by itself.
2. It should be filled in a dry and dust-free room.
3. The molecular sieve is strictly forbidden to be exposed in the air for a long time after opening the package. From filling to gluing and sealing, it should be completed continuously in a short time. The aluminum enclosure of the filled molecular sieve should be synthesized into insulating glass within 45 minutes.
4. There shall be no air leakage on the four sides of the sealed insulating glass.
5. After the hollow glass is glued together, it is strictly prohibited to be exposed to the sun.
In short, to do: regular detection, drying, indoor, dust-free, quick installation, prevent air leakage and exposure to the sun.